SRT Tire Pressure

Recommended tire pressure settings for SRT tires to improve fuel efficiency, extend tire life and drive safely.

There are 1 SRT model from 2013 to 2014 with recommended tire inflation pressures from 29 to 29 psi based on SRT model trims and original equipment tire sizes. Select SRT model or year to find recommended tire pressure for your SRT.

It is vital to maintain proper tire inflation pressures for SRT tires. Low tire pressure and underinflated tires can lead to uneven and excessive tire wear, poor handling and reduced fuel economy. High tire pressure and overinflated tires can result in reduced traction, poor braking and can even be a cause of a tire blowout. Check tire pressure regularly and maintain correct tire inflation for SRT to enjoy a safe and comfortable drive.

Recommended tire pressure for SRT is determined by the manufacturer based on its characteristics and original equipment tire sizes. You can find SRT recommended tire pressure in owner's manual or on a tire placard on the side of driver's door or door jam. SRT tire inflation will be listed in psi (pounds per square inch), bar or kPa (kilopascals). Keep in mind that tire inflation listed on tire sidewall is the maximum air pressure the tire can hold to carry its maximum load, and not necessarily the recommended tire pressure for SRT. Your SRT may also have different recommended tire pressure settings for front and rear tires, especially if equipped with staggered tires.

To check SRT tire pressure you will need to know its recommended tire inflation and a tire pressure gauge. Check tire pressure when tires are "cold" using quality tire pressure gauge. Adjust SRT tire inflation to the recommended tire pressure settings as needed by adding or releasing air.

If you replace SRT original equipment tires and switch to different tire size, make sure to follow guidelines for the application of load and inflation tables to find proper tire pressure for new tires. Always refer to the SRT owner’s manual for any specific safety advice regarding the application of replacement tires.

SRT tire pressure fluctuates with ambient temperatures, so during winter when temperatures drop tires may lose approximately 1 psi of air pressure for every 10 degree Fahrenheit decrease in temperature. Some vehicle manufacturers may recommend inflating tires 3 to 5 psi above the recommended tire pressure settings to compensate for lower temperatures during winter. Make sure to check tire pressure more often in the winter to keep tires properly inflated for a safe ride on snow and icy roads.

If your SRT is made after 2007, it should be equipped with tire pressure monitoring system that uses tire pressure sensors to alert the driver when tire pressure is low. If SRT low tire pressure warning light is on, check all tires for low air pressure and inflate as needed. If you need to reset TPMS, refer to owner's manual on how to reset SRT tire pressure monitoring system.

SRT Car Tire Pressure

SRT has 1 coupe and sedan model from 2013 to 2014 with a recommended tire pressure range of 29 psi to 29 psi.

SRT Viper Tire Pressure

Recommended tire inflation for SRT Viper tires from 2013 to 2014.

Recommended SRT Tire Pressure by Year