2016 Scion iM Base Model Tire Pressure
|Front Tire||Rear Tire|
|Recommended Tire Pressure||33 psi (2.3 bar or 228 kPa)||33 psi (2.3 bar or 228 kPa)|
|Acceptable Winter Tire Pressure||36 - 38 psi||36 - 38 psi|
|Tire Size Type||P-Metric||P-Metric|
|Tire Load Index||90||90|
|Tire Load Capacity||1323 lbs (600 kg)||1323 lbs (600 kg)|
|Tire Speed Rating||V||V|
|Maximum Tire Speed||149 mph (240 km/h)||149 mph (240 km/h)|
|2016 Scion iM Base Model is equipped with Tire Pressure Monitoring System (TPMS).|
All tire pressure information listed is for informational purposes only. TirePressure.com does not warrant or make any representations regarding the use of or the results of the use of this information. Always refer to your vehicle owner's manual for proper tire inflation pressures.
It is vital to maintain proper tire inflation pressures for 2016 Scion iM tires. Low tire pressure and underinflated tires can lead to uneven and excessive tire wear, poor handling and reduced fuel economy. High tire pressure and overinflated tires can result in reduced traction, poor braking and can even be a cause of a tire blowout. Check tire pressure regularly and maintain correct tire inflation for 2016 Scion iM to enjoy a safe and comfortable drive.
Recommended tire pressure for 2016 Scion iM is determined by the manufacturer based on its characteristics and original equipment tire sizes. You can find 2016 Scion iM recommended tire pressure in owner's manual or on a tire placard on the side of driver's door or door jam. 2016 Scion iM tire inflation will be listed in psi (pounds per square inch), bar or kPa (kilopascals). Keep in mind that tire inflation listed on tire sidewall is the maximum air pressure the tire can hold to carry its maximum load, and not necessarily the recommended tire pressure for 2016 Scion iM. Your 2016 Scion iM may also have different recommended tire pressure settings for front and rear tires, especially if equipped with staggered tires.
To check 2016 Scion iM tire pressure you will need to know its recommended tire inflation and a tire pressure gauge. Check tire pressure when tires are "cold" using quality tire pressure gauge. Adjust 2016 Scion iM tire inflation to the recommended tire pressure settings as needed by adding or releasing air.
If you replace 2016 Scion iM original equipment tires and switch to different tire size, make sure to follow guidelines for the application of load and inflation tables to find proper tire pressure for new tires. Always refer to the 2016 Scion iM owner’s manual for any specific safety advice regarding the application of replacement tires.
2016 Scion iM tire pressure fluctuates with ambient temperatures, so during winter when temperatures drop tires may lose approximately 1 psi of air pressure for every 10 degree Fahrenheit decrease in temperature. Some vehicle manufacturers may recommend inflating tires 3 to 5 psi above the recommended tire pressure settings to compensate for lower temperatures during winter. Make sure to check tire pressure more often in the winter to keep tires properly inflated for a safe ride on snow and icy roads.
If your 2016 Scion iM is made after 2007, it should be equipped with tire pressure monitoring system that uses tire pressure sensors to alert the driver when tire pressure is low. If 2016 Scion iM low tire pressure warning light is on, check all tires for low air pressure and inflate as needed. If you need to reset TPMS, refer to owner's manual on how to reset 2016 Scion iM tire pressure monitoring system.