2013 Toyota Sienna Recommended Tire Pressure

2013 Toyota Sienna tire pressure chart with recommended tire pressure for settings for 2013 Toyota Sienna tires to improve fuel efficiency, extend tire life and drive safely.

Recommended tire pressure for 2013 Toyota Sienna typically ranges around 35 to 36 psi for front tires and 35 to 36 psi for rear tires. Select your trim to see its original equipment tire sizes and recommended tire pressure.

2013 Toyota Sienna Base Model Tire Pressure

Recommended tire pressure for 2013 Toyota Sienna Base Model tires with 1 original equipment tire size set.

Front and Rear Tire Size P235/60R17
Recommended Front Tire Pressure 35 psi (2.4 bar or 241 kPa)
Recommended Rear Tire Pressure 35 psi (2.4 bar or 241 kPa)
Tire Size Type P-Metric
Tire Load Index 100
Tire Load Capacity 1764 lbs (800 kg)
Tire Speed Rating T
Maximum Tire Speed 118 mph (190 km/h)
Tire Load Range SL (Standard Load)
Maximum Load Tire Pressure 36 psi @ 1764 lbs

2013 Toyota Sienna L Tire Pressure

Recommended tire pressure for 2013 Toyota Sienna L tires with 1 original equipment tire size set.

Front and Rear Tire Size P235/60R17
Recommended Front Tire Pressure 35 psi (2.4 bar or 241 kPa)
Recommended Rear Tire Pressure 35 psi (2.4 bar or 241 kPa)
Tire Size Type P-Metric
Tire Load Index 100
Tire Load Capacity 1764 lbs (800 kg)
Tire Speed Rating T
Maximum Tire Speed 118 mph (190 km/h)
Tire Load Range SL (Standard Load)
Maximum Load Tire Pressure 36 psi @ 1764 lbs

2013 Toyota Sienna LE (AWD) Tire Pressure

Recommended tire pressure for 2013 Toyota Sienna LE (AWD) tires with 1 original equipment tire size set.

Front and Rear Tire Size P235/55R18
Recommended Front Tire Pressure 35 psi (2.4 bar or 241 kPa)
Recommended Rear Tire Pressure 35 psi (2.4 bar or 241 kPa)
Tire Size Type P-Metric
Tire Load Index 99
Tire Load Capacity 1709 lbs (775 kg)
Tire Speed Rating T
Maximum Tire Speed 118 mph (190 km/h)
Tire Load Range SL (Standard Load)
Maximum Load Tire Pressure 36 psi @ 1709 lbs

2013 Toyota Sienna LE (FWD) Tire Pressure

Recommended tire pressure for 2013 Toyota Sienna LE (FWD) tires with 1 original equipment tire size set.

Front and Rear Tire Size P235/60R17
Recommended Front Tire Pressure 35 psi (2.4 bar or 241 kPa)
Recommended Rear Tire Pressure 35 psi (2.4 bar or 241 kPa)
Tire Size Type P-Metric
Tire Load Index 100
Tire Load Capacity 1764 lbs (800 kg)
Tire Speed Rating T
Maximum Tire Speed 118 mph (190 km/h)
Tire Load Range SL (Standard Load)
Maximum Load Tire Pressure 36 psi @ 1764 lbs

2013 Toyota Sienna Limited (AWD) Tire Pressure

Recommended tire pressure for 2013 Toyota Sienna Limited (AWD) tires with 1 original equipment tire size set.

Front and Rear Tire Size P235/55R18
Recommended Front Tire Pressure 35 psi (2.4 bar or 241 kPa)
Recommended Rear Tire Pressure 35 psi (2.4 bar or 241 kPa)
Tire Size Type P-Metric
Tire Load Index 99
Tire Load Capacity 1709 lbs (775 kg)
Tire Speed Rating T
Maximum Tire Speed 118 mph (190 km/h)
Tire Load Range SL (Standard Load)
Maximum Load Tire Pressure 36 psi @ 1709 lbs

2013 Toyota Sienna Limited (FWD) Tire Pressure

Recommended tire pressure for 2013 Toyota Sienna Limited (FWD) tires with 1 original equipment tire size set.

Front and Rear Tire Size P235/55R18
Recommended Front Tire Pressure 35 psi (2.4 bar or 241 kPa)
Recommended Rear Tire Pressure 35 psi (2.4 bar or 241 kPa)
Tire Size Type P-Metric
Tire Load Index 99
Tire Load Capacity 1709 lbs (775 kg)
Tire Speed Rating V
Maximum Tire Speed 149 mph (240 km/h)
Tire Load Range SL (Standard Load)
Maximum Load Tire Pressure 36 psi @ 1709 lbs

2013 Toyota Sienna SE Tire Pressure

Recommended tire pressure for 2013 Toyota Sienna SE tires with 1 original equipment tire size set.

Front and Rear Tire Size P235/50R19
Recommended Front Tire Pressure 36 psi (2.5 bar or 248 kPa)
Recommended Rear Tire Pressure 36 psi (2.5 bar or 248 kPa)
Tire Size Type P-Metric
Tire Load Index 99
Tire Load Capacity 1709 lbs (775 kg)
Tire Speed Rating V
Maximum Tire Speed 149 mph (240 km/h)
Tire Load Range SL (Standard Load)
Maximum Load Tire Pressure 36 psi @ 1709 lbs

2013 Toyota Sienna XLE (AWD) Tire Pressure

Recommended tire pressure for 2013 Toyota Sienna XLE (AWD) tires with 1 original equipment tire size set.

Front and Rear Tire Size P235/55R18
Recommended Front Tire Pressure 35 psi (2.4 bar or 241 kPa)
Recommended Rear Tire Pressure 35 psi (2.4 bar or 241 kPa)
Tire Size Type P-Metric
Tire Load Index 99
Tire Load Capacity 1709 lbs (775 kg)
Tire Speed Rating T
Maximum Tire Speed 118 mph (190 km/h)
Tire Load Range SL (Standard Load)
Maximum Load Tire Pressure 36 psi @ 1709 lbs

2013 Toyota Sienna XLE (FWD) Tire Pressure

Recommended tire pressure for 2013 Toyota Sienna XLE (FWD) tires with 1 original equipment tire size set.

Front and Rear Tire Size P235/60R17
Recommended Front Tire Pressure 35 psi (2.4 bar or 241 kPa)
Recommended Rear Tire Pressure 35 psi (2.4 bar or 241 kPa)
Tire Size Type P-Metric
Tire Load Index 100
Tire Load Capacity 1764 lbs (800 kg)
Tire Speed Rating T
Maximum Tire Speed 118 mph (190 km/h)
Tire Load Range SL (Standard Load)
Maximum Load Tire Pressure 36 psi @ 1764 lbs

Toyota Tire Pressure | Toyota Sienna Tire Pressure | 2013 Toyota Tire Pressure

It is vital to maintain proper tire pressure for 2013 Toyota Sienna tires. Low tire pressure will result in tire underinflation while high tire pressure will result in tire overinflation, which can decrease fuel efficiency, lead to uneven tire tread wear and reduce tire life, compromise tire safety and cause tire blowout. Check 2013 Toyota Sienna tire pressure regularly, and monitor 2013 Toyota Sienna tire inflation levels to avoid driving with overinflated or underinflated tires.

Tire inflation value listed on tire sidewall is the maximum air pressure the tire can hold to carry its maximum load, and not the recommended tire pressure for 2013 Toyota Sienna. Use 2013 Toyota Sienna recommended tire pressure settings listed on the tire pressure chart found in 2013 Toyota Sienna owner's manual, on a sticker on driver's door or door jam, inner trunk lid, in the console or on the fuel door. Recommended tire pressure for your 2013 Toyota Sienna tires will be listed in one of the following pressure units: psi (pounds per square inch), bar or kPa (kiloPascals). Pay attention as your 2013 Toyota Sienna may have different recommended tire pressure values for front and rear tires, especially if equipped with staggered tires. Keep your 2013 Toyota Sienna tires inflated at recommended tire pressure levels at all times for your driving comfort and safety.

If you replace 2013 Toyota Sienna original equipment tires or switch to plus size tires, make sure to follow guidelines for the application of load and inflation tables to find proper tire pressure for your new 2013 Toyota Sienna tires. 2013 Toyota Sienna tires with the same load index, regardless of tire size, may carry the same load, but may require substantially different inflation pressures. Tire load index may not be used independently to determine replacement tire acceptability for load capacity. An equal or greater load index does not always correspond to equal or greater load capacity at all inflation pressure settings.

Always refer to the 2013 Toyota Sienna owner’s manual for any specific safety advice regarding the application of 2013 Toyota Sienna replacement tires.

2013 Toyota Sienna replacement tires must have equal or greater speed rating compared to the original equipment tires if your 2013 Toyota Sienna speed capability is to be maintained. It is recommended that tire installers refer to the 2013 Toyota Sienna owner’s manual to identify any tire speed rating restriction or recommendation that could affect the operation of the vehicle. If your 2013 Toyota Sienna replacement tires have a lower speed rating than the original equipment tires, your vehicle’s speed must be restricted to that of the replacement tires.

Original equipment tires that come on your 2013 Toyota Sienna will have the proper tire load index, so use same or higher load index when choosing replacement tires. Tire load index tells you how much weight your tire can carry. Putting too much weight on your tires will overload them, and can cause premature tire wear, tire damage or even tire blowout. Refer to your 2013 Toyota Sienna manual to find its original equipment tire sizes and load ratings.

2013 Toyota Sienna tire pressure may fluctuate with ambient temperatures, so check 2013 Toyota Sienna tire pressure when ambient temperatures change. In winter when temperatures drop, 2013 Toyota Sienna tires may deflate by approximately 1 psi for each 10 degree Fahrenheit decrease in temperature. Maintain proper 2013 Toyota Sienna winter tire pressure by adding air to your tires as needed to the recommended tire inflation levels.

2013 Toyota Sienna tire pressure should be checked when tires are cold, after your vehicle has not been driven for at least three hours. It is best to check your tire inflation pressure in the morning, after the vehicle has been parked overnight, using a reliable tire pressure gauge.

If your 2013 Toyota Sienna is equipped with tire pressure monitoring system (TPMS), pay attention to low tire pressure warning light being on. Ensure 2013 Toyota Sienna tire pressure sensors are working properly to stay alert and enjoy a safe ride. If your tire pressure warning light is on, check front and rear tires to make sure they are properly inflated.

What is the recommended tire pressure for 2013 Toyota Sienna?
Recommended tire pressure for 2013 Toyota Sienna is determined by the manufacturer based on your vehicle's characteristics and original equipment tire sizes. Select your 2013 Toyota Sienna trim to get recommended tire inflation for 2013 Toyota Sienna tires.

How do I find recommended tire pressure settings for 2013 Toyota Sienna? What is correct 2013 Toyota Sienna tire pressure?
You can find your 2013 Toyota Sienna recommended tire pressure in 2013 Toyota Sienna owner's manual, on a sticker on driver's door or door jam, inner trunk lid, in the console or on the fuel door. Recommended tire pressure for 2013 Toyota Sienna will be listed in psi, bar or kPa.

How to check 2013 Toyota Sienna tire pressure?
Proper 2013 Toyota Sienna tire inflation is essential to the overall tire performance and safety. To check tire pressure for 2013 Toyota Sienna you will need to know its recommended tire pressure and a tire pressure gauge. Check inflation pressures in 2013 Toyota Sienna tires with tire pressure gauge and adjust to 2013 Toyota Sienna recommended tire pressure levels as needed by adding or releasing air. Make sure to check tire inflation for your 2013 Toyota Sienna regularly to ensure safe and comfortable drive.

Why is 2013 Toyota Sienna tire pressure warning light on?
If your 2013 Toyota Sienna is equipped with Tire Pressure Monitoring System (TPMS) it will alert you when tire pressure is too low and your tires could be underinflated, which can lead to uneven tire wear or can cause tire failure. If 2013 Toyota Sienna low tire pressure warning light is on, check all 2013 Toyota Sienna tires for low tire pressure and inflate tires to the recommended tire pressure levels. Keep in mind that Tire Pressure Monitoring System does not replace routine tire pressure check and maintenance.

How to reset tire pressure warning light for 2013 Toyota Sienna?
To reset tire pressure monitoring system for 2013 Toyota Sienna, make sure front and rear tires are inflated to the recommended levels. Refer to your 2013 Toyota Sienna owner's manual on how to reset your tire pressure monitoring system.

What is recommended winter tire pressure for 2013 Toyota Sienna?
Recommended tire pressure for 2013 Toyota Sienna is the same for any season, but you may inflate your 2013 Toyota Sienna tires 3 to 5 psi above the recommended tire pressure set by the manufacturer to compensate for lower temperatures during winter. Make sure to check your 2013 Toyota Sienna tire pressure more often in the winter to keep tires properly inflated for a safe ride on snow and icy roads.