2008 Mercury Milan Tire Pressure

2008 Mercury Milan tire inflation pressures range around 33 to 34 psi based on the trim and original equipment tire sizes. Select from 4 trims and 4 original equipment tire size sets to find recommended tire pressure for 2008 Mercury Milan tires to improve fuel efficiency, extend tire life and drive safely.

2008 Mercury Milan I-4

2008 Mercury Milan I-4 is equipped with Tire Pressure Monitoring System (TPMS).

Front Tire Rear Tire
Tire Size P205/60R16 P205/60R16
Recommended Tire Pressure 34 psi 34 psi
Acceptable Winter Tire Pressure 37 - 39 psi 37 - 39 psi
Tire Size Type P-Metric P-Metric
Tire Load Index (Maximum Tire Load Capacity) 91 (1356 lbs or 615 kg) 91 (1356 lbs or 615 kg)
Tire Speed Rating (Maximum Speed) T (118 mph or 190 km/h) T (118 mph or 190 km/h)

2008 Mercury Milan Premier I-4

2008 Mercury Milan Premier I-4 is equipped with Tire Pressure Monitoring System (TPMS).

Front Tire Rear Tire
Tire Size P225/50R17 P225/50R17
Recommended Tire Pressure 33 psi 33 psi
Acceptable Winter Tire Pressure 36 - 38 psi 36 - 38 psi
Tire Size Type P-Metric P-Metric
Tire Load Index (Maximum Tire Load Capacity) 93 (1433 lbs or 650 kg) 93 (1433 lbs or 650 kg)
Tire Speed Rating (Maximum Speed) V (149 mph or 240 km/h) V (149 mph or 240 km/h)

2008 Mercury Milan Premier V6

2008 Mercury Milan Premier V6 is equipped with Tire Pressure Monitoring System (TPMS).

Front Tire Rear Tire
Tire Size P225/50R17 P225/50R17
Recommended Tire Pressure 33 psi 33 psi
Acceptable Winter Tire Pressure 36 - 38 psi 36 - 38 psi
Tire Size Type P-Metric P-Metric
Tire Load Index (Maximum Tire Load Capacity) 93 (1433 lbs or 650 kg) 93 (1433 lbs or 650 kg)
Tire Speed Rating (Maximum Speed) V (149 mph or 240 km/h) V (149 mph or 240 km/h)
Amazing Deals and Deep Discounts

2008 Mercury Milan V6

2008 Mercury Milan V6 is equipped with Tire Pressure Monitoring System (TPMS).

Front Tire Rear Tire
Tire Size P205/60R16 P205/60R16
Recommended Tire Pressure 34 psi 34 psi
Acceptable Winter Tire Pressure 37 - 39 psi 37 - 39 psi
Tire Size Type P-Metric P-Metric
Tire Load Index (Maximum Tire Load Capacity) 91 (1356 lbs or 615 kg) 91 (1356 lbs or 615 kg)
Tire Speed Rating (Maximum Speed) T (118 mph or 190 km/h) T (118 mph or 190 km/h)

All tire pressure information listed is for informational purposes only. TirePressure.com does not warrant or make any representations regarding the use of or the results of the use of this information. Always refer to vehicle owner's manual for recommended tire inflation pressures.

It is vital to maintain correct tire inflation pressures for 2008 Mercury Milan tires. Low tire pressure and underinflated tires can lead to uneven and excessive tire wear, poor handling and reduced fuel economy. High tire pressure and overinflated tires can result in reduced traction, poor braking and can even be a cause of a tire blowout. Check tire pressure regularly and maintain correct tire inflation for 2008 Mercury Milan to enjoy a safe and comfortable drive, save money on gas and keep auto insurance premiums low.

Recommended tire pressure for 2008 Mercury Milan is determined by the manufacturer based on its characteristics and original equipment tire sizes. You can find 2008 Mercury Milan recommended tire pressure in owner's manual or on a tire placard on the side of driver's door or door jam. 2008 Mercury Milan tire inflation will be listed in psi (pounds per square inch), bar or kPa (kilopascals). Keep in mind that tire inflation listed on tire sidewall is the maximum air pressure the tire can hold to carry its maximum load, and not necessarily the recommended tire pressure for 2008 Mercury Milan. 2008 Mercury Milan may have different recommended tire pressure settings for front and rear tires, especially if equipped with staggered tires.

To check 2008 Mercury Milan tire pressure you will need to know its recommended tire inflation and a tire pressure gauge. Check tire inflation when tires are "cold" and have not been driven for at least 3 hours. Adjust 2008 Mercury Milan tire inflation to the recommended tire pressure levels as needed by adding air with a tire inflator.

If you replace 2008 Mercury Milan original equipment tires with optional or plus tire sizes, make sure to follow guidelines on how to apply tire load inflation tables when replacing 2008 Mercury Milan tires to find proper tire pressure for new tires. Always refer to the 2008 Mercury Milan owner’s manual for any specific safety advice regarding the application of replacement tires.

2008 Mercury Milan tire pressure fluctuates with ambient temperatures, so when temperatures drop tires may lose approximately 1 psi of air pressure for every 10 degree Fahrenheit decrease in temperature. During winter 2008 Mercury Milan tires can be inflated 3 to 5 psi above the recommended tire pressure settings to compensate for lower temperatures. Never overinflate above psi indicated on tire sidewall. Make sure to check tire pressure regularly in the winter to keep tires properly inflated for a safe ride on snow and icy roads. Consult owner's manual for recommended winter tire pressure for 2008 Mercury Milan.

2008 Mercury Milan should be equipped with tire pressure monitoring system (TPMS) that uses tire pressure sensors to alert the driver when tire pressure is low. When 2008 Mercury Milan low tire pressure warning light is on, check all tires for low air pressure and inflate as needed. Refer to owner's manual on how to reset 2008 Mercury Milan tire pressure monitoring system.