2000 Bentley Arnage Tire Pressure

2000 Bentley Arnage tire inflation pressures range around 30 to 32 psi based on the trim and original equipment tire sizes. Select from 2 trims and 2 original equipment tire size sets to find recommended tire pressure for 2000 Bentley Arnage tires to improve fuel efficiency, extend tire life and drive safely.

2000 Bentley Arnage Green Label

Front Tire Rear Tire
Tire Size 255/50R18 255/50R18
Recommended Tire Pressure 30 psi 32 psi
Acceptable Winter Tire Pressure 33 - 35 psi 35 - 37 psi
Tire Size Type Metric Metric
Tire Load Index (Maximum Tire Load Capacity) 102 (1874 lbs or 850 kg) 102 (1874 lbs or 850 kg)
Tire Speed Rating (Maximum Speed) Y (186 mph or 300 km/h) Y (186 mph or 300 km/h)

2000 Bentley Arnage Red Label

Front Tire Rear Tire
Tire Size 255/50R18 255/50R18
Recommended Tire Pressure 30 psi 32 psi
Acceptable Winter Tire Pressure 33 - 35 psi 35 - 37 psi
Tire Size Type Metric Metric
Tire Load Index (Maximum Tire Load Capacity) 102 (1874 lbs or 850 kg) 102 (1874 lbs or 850 kg)
Tire Speed Rating (Maximum Speed) Y (186 mph or 300 km/h) Y (186 mph or 300 km/h)
Amazing Deals and Deep Discounts

All tire pressure information listed is for informational purposes only. TirePressure.com does not warrant or make any representations regarding the use of or the results of the use of this information. Always refer to vehicle owner's manual for recommended tire inflation pressures.

It is vital to maintain correct tire inflation pressures for 2000 Bentley Arnage tires. Low tire pressure and underinflated tires can lead to uneven and excessive tire wear, poor handling and reduced fuel economy. High tire pressure and overinflated tires can result in reduced traction, poor braking and can even be a cause of a tire blowout. Check tire pressure regularly and maintain correct tire inflation for 2000 Bentley Arnage to enjoy a safe and comfortable drive, save money on gas and keep auto insurance premiums low.

Recommended tire pressure for 2000 Bentley Arnage is determined by the manufacturer based on its characteristics and original equipment tire sizes. You can find 2000 Bentley Arnage recommended tire pressure in owner's manual or on a tire placard on the side of driver's door or door jam. 2000 Bentley Arnage tire inflation will be listed in psi (pounds per square inch), bar or kPa (kilopascals). Keep in mind that tire inflation listed on tire sidewall is the maximum air pressure the tire can hold to carry its maximum load, and not necessarily the recommended tire pressure for 2000 Bentley Arnage. 2000 Bentley Arnage may have different recommended tire pressure settings for front and rear tires, especially if equipped with staggered tires.

To check 2000 Bentley Arnage tire pressure you will need to know its recommended tire inflation and a tire pressure gauge. Check tire inflation when tires are "cold" and have not been driven for at least 3 hours. Adjust 2000 Bentley Arnage tire inflation to the recommended tire pressure levels as needed by adding air with a tire inflator.

If you replace 2000 Bentley Arnage original equipment tires with optional or plus tire sizes, make sure to follow guidelines on how to apply tire load inflation tables when replacing 2000 Bentley Arnage tires to find proper tire pressure for new tires. Always refer to the 2000 Bentley Arnage owner’s manual for any specific safety advice regarding the application of replacement tires.

2000 Bentley Arnage tire pressure fluctuates with ambient temperatures, so when temperatures drop tires may lose approximately 1 psi of air pressure for every 10 degree Fahrenheit decrease in temperature. During winter 2000 Bentley Arnage tires can be inflated 3 to 5 psi above the recommended tire pressure settings to compensate for lower temperatures. Never overinflate above psi indicated on tire sidewall. Make sure to check tire pressure regularly in the winter to keep tires properly inflated for a safe ride on snow and icy roads. Consult owner's manual for recommended winter tire pressure for 2000 Bentley Arnage.