1993 Mercury Tracer LTS
|Front Tire||Rear Tire|
|Recommended Tire Pressure||32 psi||32 psi|
|Acceptable Winter Tire Pressure||35 - 37 psi||35 - 37 psi|
|Tire Size Type||P-Metric||P-Metric|
|Tire Load Index (Maximum Tire Load Capacity)||82 (1048 lbs or 475 kg)||82 (1048 lbs or 475 kg)|
|Tire Speed Rating (Maximum Speed)||H (130 mph or 210 km/h)||H (130 mph or 210 km/h)|
1993 Mercury Tracer Sedan
1993 Mercury Tracer Trio Sedan
1993 Mercury Tracer Trio Wagon
1993 Mercury Tracer Wagon
All tire pressure information listed is for informational purposes only. TirePressure.com does not warrant or make any representations regarding the use of or the results of the use of this information. Always refer to vehicle owner's manual for recommended tire inflation pressures.
It is vital to maintain correct tire inflation pressures for 1993 Mercury Tracer tires. Low tire pressure and underinflated tires can lead to uneven and excessive tire wear, poor handling and reduced fuel economy. High tire pressure and overinflated tires can result in reduced traction, poor braking and can even be a cause of a tire blowout. Check tire pressure regularly and maintain correct tire inflation for 1993 Mercury Tracer to enjoy a safe and comfortable drive, save money on gas and keep auto insurance premiums low.
Recommended tire pressure for 1993 Mercury Tracer is determined by the manufacturer based on its characteristics and original equipment tire sizes. You can find 1993 Mercury Tracer recommended tire pressure in owner's manual or on a tire placard on the side of driver's door or door jam. 1993 Mercury Tracer tire inflation will be listed in psi (pounds per square inch), bar or kPa (kilopascals). Keep in mind that tire inflation listed on tire sidewall is the maximum air pressure the tire can hold to carry its maximum load, and not necessarily the recommended tire pressure for 1993 Mercury Tracer. 1993 Mercury Tracer may have different recommended tire pressure settings for front and rear tires, especially if equipped with staggered tires.
To check 1993 Mercury Tracer tire pressure you will need to know its recommended tire inflation and a tire pressure gauge. Check tire inflation when tires are "cold" and have not been driven for at least 3 hours. Adjust 1993 Mercury Tracer tire inflation to the recommended tire pressure levels as needed by adding air with a tire inflator.
If you replace 1993 Mercury Tracer original equipment tires with optional or plus tire sizes, make sure to follow guidelines on how to apply tire load inflation tables when replacing 1993 Mercury Tracer tires to find proper tire pressure for new tires. Always refer to the 1993 Mercury Tracer owner’s manual for any specific safety advice regarding the application of replacement tires.
1993 Mercury Tracer tire pressure fluctuates with ambient temperatures, so when temperatures drop tires may lose approximately 1 psi of air pressure for every 10 degree Fahrenheit decrease in temperature. During winter 1993 Mercury Tracer tires can be inflated 3 to 5 psi above the recommended tire pressure settings to compensate for lower temperatures. Never overinflate above psi indicated on tire sidewall. Make sure to check tire pressure regularly in the winter to keep tires properly inflated for a safe ride on snow and icy roads. Consult owner's manual for recommended winter tire pressure for 1993 Mercury Tracer.