1990 BMW 735i Tire Pressure

1990 BMW 735i tire inflation pressures range of 33 to 38 psi based on 1 trim and 1 original equipment tire size set.

1990 BMW 735i Base Model

Front Tire Rear Tire
Tire Size 225/60R15
Recommended Tire Pressure 33 psi 38 psi
Acceptable Winter Tire Pressure 36 - 38 psi 41 - 43 psi
Tire Size Type Metric
Tire Speed Rating (Maximum Speed) V (149 mph or 240 km/h)

All tire pressure data listed is for informational purposes only. TirePressure.com does not warrant or make any representations regarding the use of or the results of the use of this information. Always refer to vehicle owner's manual for recommended tire inflation pressures.

It is vital to maintain correct tire inflation pressures for 1990 BMW 735i tires. Low tire pressure and underinflated tires can lead to uneven and excessive tire wear, poor handling and reduced fuel economy. High tire pressure and overinflated tires can result in reduced traction, poor braking and can even be a cause of a tire blowout. Check tire pressure regularly and maintain correct tire inflation for 1990 BMW 735i to enjoy a safe and comfortable drive, save money on gas and keep auto insurance premiums low.

Recommended tire pressure for 1990 BMW 735i is determined by the manufacturer based on its characteristics and original equipment tire sizes. You can find 1990 BMW 735i recommended tire pressure in owner's manual or on a tire placard on the side of driver's door or door jam. 1990 BMW 735i tire inflation will be listed in psi (pounds per square inch), bar or kPa (kilopascals). Keep in mind that tire inflation listed on tire sidewall is the maximum air pressure the tire can hold to carry its maximum load, and not necessarily the recommended tire pressure for 1990 BMW 735i. 1990 BMW 735i may have different recommended tire pressure settings for front and rear tires, especially if equipped with staggered tires.

To check 1990 BMW 735i tire pressure you will need to know its recommended tire inflation and a tire pressure gauge. Check tire inflation when tires are "cold" and have not been driven for at least 3 hours. Adjust 1990 BMW 735i tire inflation to the recommended tire pressure levels as needed by adding air with a tire inflator.

If you replace 1990 BMW 735i original equipment tires with optional or plus tire sizes, make sure to follow guidelines on how to apply tire load inflation tables when replacing 1990 BMW 735i tires to find proper tire pressure for new tires. Always refer to the 1990 BMW 735i owner’s manual for any specific safety advice regarding the application of replacement tires.

1990 BMW 735i tire pressure fluctuates with ambient temperatures, so when temperatures drop tires may lose approximately 1 psi of air pressure for every 10 degree Fahrenheit decrease in temperature. During winter 1990 BMW 735i tires can be inflated 3 to 5 psi above the recommended tire pressure settings to compensate for lower temperatures. Never overinflate above psi indicated on tire sidewall. Make sure to check tire pressure regularly in the winter to keep tires properly inflated for a safe ride on snow and icy roads. Consult owner's manual for recommended winter tire pressure for 1990 BMW 735i.