1990 BMW 325is Base Model Tire Pressure
Recommended tire pressure for 1990 BMW 325is Base Model tires (1 original equipment tire size set).
|Front and Rear Tire Size||195/65R14|
|Recommended Front Tire Pressure||31 psi (2.1 bar or 214 kPa)|
|Recommended Rear Tire Pressure||31 psi (2.1 bar or 214 kPa)|
|Tire Size Type||Metric|
|Tire Load Index|
|Tire Load Capacity|
|Tire Speed Rating||V|
|Maximum Tire Speed||149 mph (240 km/h)|
|Tire Load Range||SL (Standard Load)|
|Maximum Load Tire Pressure||36 psi|
All tire pressure information listed is for informational purposes only. TirePressure.com does not warrant or make any representations regarding the use of or the results of the use of this information. Always refer to your vehicle owner's manual for proper tire inflation pressures.
It is vital to maintain proper tire inflation pressures for 1990 BMW 325is tires. Low tire pressure will result in tire underinflation while high tire pressure will result in tire overinflation, which can decrease fuel efficiency, lead to uneven tire tread wear and reduce tire life, compromise tire safety and cause tire blowout. Check 1990 BMW 325is tire pressure regularly, and monitor 1990 BMW 325is tire inflation pressures to avoid driving with overinflated or underinflated tires.
Tire inflation listed on tire sidewall is the maximum air pressure the tire can hold to carry its maximum load, and not the recommended tire pressure for 1990 BMW 325is. Use 1990 BMW 325is recommended tire pressure settings listed on the tire pressure chart found in 1990 BMW 325is owner's manual, on a tire placard on driver's door or door jam, inner trunk lid, in the console or on the fuel door. Recommended tire pressure for your 1990 BMW 325is tire sizes will be listed in one of the following pressure units: psi (pounds per square inch), bar or kPa (kiloPascals). Pay attention as your 1990 BMW 325is may have different recommended tire inflation pressures for front and rear tires, especially if equipped with staggered tires. Keep your 1990 BMW 325is tires inflated at recommended tire inflation pressures at all times for your driving comfort and safety.
If you replace 1990 BMW 325is original equipment tires or switch to plus size tires, make sure to follow guidelines for the application of load and inflation tables to find proper tire pressure for your new 1990 BMW 325is tires. 1990 BMW 325is tires with the same load index, regardless of tire size, may carry the same load, but may require substantially different inflation pressures. Tire load index may not be used independently to determine replacement tire acceptability for load capacity. An equal or greater load index does not always correspond to equal or greater load capacity at all inflation pressure settings. 1990 BMW 325is replacement tires must have equal or greater speed rating compared to the original equipment tires if your 1990 BMW 325is speed capability is to be maintained. It is recommended that tire installers refer to the 1990 BMW 325is owner’s manual to identify any tire speed rating restriction or recommendation that could affect the operation of the vehicle. If your 1990 BMW 325is replacement tires have a lower speed rating than the original equipment tires, your vehicle’s speed must be restricted to that of the replacement tires. Original equipment tires that come on your 1990 BMW 325is will have the proper tire load index, so use same or higher load index when choosing replacement tires. Tire load index tells you how much weight your tire can carry. Putting too much weight on your tires will overload them, and can cause premature tire wear, tire damage or even tire blowout. Refer to your 1990 BMW 325is manual to find its original equipment tire sizes and load ratings. Always refer to the 1990 BMW 325is owner’s manual for any specific safety advice regarding the application of 1990 BMW 325is replacement tires.
1990 BMW 325is tire pressure may fluctuate with ambient temperatures, so check 1990 BMW 325is tire pressure when ambient temperatures change. In winter when temperatures drop, 1990 BMW 325is tires may deflate by approximately 1 psi for each 10 degree Fahrenheit decrease in temperature. Maintain proper 1990 BMW 325is winter tire pressure by adding air to your tires as needed to the recommended tire inflation levels.
1990 BMW 325is tire pressure should be checked when tires are cold, after your vehicle has not been driven for at least three hours. It is best to check your tire inflation pressure in the morning, after the vehicle has been parked overnight, using a reliable tire pressure gauge.
If your 1990 BMW 325is is equipped with tire pressure monitoring system (TPMS), pay attention to low tire pressure warning light being on. Ensure 1990 BMW 325is tire pressure sensors are working properly to stay alert and enjoy a safe ride. If your tire pressure warning light is on, check front and rear tires to make sure they are properly inflated.
What is the recommended tire pressure for 1990 BMW 325is?
Recommended tire pressure for 1990 BMW 325is is determined by the manufacturer based on your vehicle's characteristics and original equipment tire sizes. Select your 1990 BMW 325is trim to get recommended tire inflation pressures for 1990 BMW 325is tires.
Where do I find recommended tire inflation pressures for 1990 BMW 325is?
You can find your 1990 BMW 325is recommended tire pressure in 1990 BMW 325is owner's manual, on a tire placard on driver's door or door jam, inner trunk lid, in the console or on the fuel door. Recommended tire pressure for 1990 BMW 325is will be listed in psi, bar or kPa.
How to check 1990 BMW 325is tire pressure?
Proper 1990 BMW 325is tire inflation is essential to the overall tire performance and safety. To check tire pressure for 1990 BMW 325is you will need to know its recommended tire pressure and a tire pressure gauge. Check cold inflation pressures in 1990 BMW 325is tires with tire pressure gauge and adjust to 1990 BMW 325is recommended tire inflation pressures as needed by adding or releasing air. Make sure to check tire inflation for your 1990 BMW 325is regularly to ensure safe and comfortable drive.
Is my 1990 BMW 325is equipped with a tire pressure monitoring system (TPMS)?
If your BMW 325is is made after 2007, it should be equipped with tire pressure monitoring system. To confirm if your 1990 BMW 325is has TPMS, turn on the ignition without starting the engine. If a tire icon with an exclamation sign lights up on your dashboard, your 1990 BMW 325is is equipped with TPMS. You can also check 1990 BMW 325is owner's manual for more information.
Why is 1990 BMW 325is tire pressure warning light on?
If your 1990 BMW 325is is equipped with Tire Pressure Monitoring System (TPMS) it will alert you when tire pressure is too low and your tires could be underinflated, which can lead to uneven tire wear or can cause tire failure. If 1990 BMW 325is low tire pressure warning light is on, check all 1990 BMW 325is tires for low air pressure and inflate tires to the recommended tire inflation pressures. Keep in mind that Tire Pressure Monitoring System does not replace routine tire pressure check and maintenance.
How do I reset 1990 BMW 325is tire pressure monitoring system?
To reset tire pressure monitoring system for 1990 BMW 325is, make sure front and rear tires are inflated to the recommended levels. Refer to your owner's manual on how to reset 1990 BMW 325is TPMS.
What is recommended winter tire pressure for 1990 BMW 325is?
Recommended tire pressure for 1990 BMW 325is is the same for any season, but you may inflate your 1990 BMW 325is tires 3 to 5 psi above the recommended tire pressure set by the manufacturer to compensate for lower temperatures during winter. Make sure to check your 1990 BMW 325is tire pressure more often in the winter to keep tires properly inflated for a safe ride on snow and icy roads.