Mazda Miata Recommended Tire Pressure

Check Mazda Miata tire pressure charts with recommended tire inflation pressures for Mazda Miata tires to improve fuel efficiency, extend tire life and drive safely. Select your Mazda Miata year.

It is vital to maintain proper tire inflation pressures for Mazda Miata tires. Low tire pressure will result in tire underinflation while high tire pressure will result in tire overinflation, which can reduce fuel efficiency, lead to uneven tire tread wear and decrease tire life, compromise tire safety and cause tire blowout. Check Mazda Miata tire pressure regularly, and monitor Mazda Miata tire inflation pressures to avoid driving with overinflated or underinflated tires.

Tire inflation listed on tire sidewall is the maximum air pressure the tire can hold to carry its maximum load, and not the recommended tire pressure for Mazda Miata. Use Mazda Miata recommended tire pressure settings listed on the tire pressure chart found in Mazda Miata owner's manual, on a tire placard on driver's door or door jam, inner trunk lid, in the console or on the fuel door. Recommended tire pressure for your Mazda Miata tire sizes will be listed in one of the following pressure units: psi (pounds per square inch), bar or kPa (kiloPascals). Pay attention as your Mazda Miata may have different recommended tire inflation pressures for front and rear tires, especially if equipped with staggered tires. Keep your Mazda Miata tires inflated at recommended tire inflation pressures at all times for your driving comfort and safety.

If you replace Mazda Miata original equipment tires or switch to plus size tires, make sure to follow guidelines for the application of load and inflation tables to find proper tire pressure for your new Mazda Miata tires. Mazda Miata tires with the same load index, regardless of tire size, may carry the same load, but may require substantially different inflation pressures. Tire load index may not be used independently to determine replacement tire acceptability for load capacity. An equal or greater load index does not always correspond to equal or greater load capacity at all inflation pressure settings. Mazda Miata replacement tires must have equal or greater speed rating compared to the original equipment tires if your Mazda Miata speed capability is to be maintained. It is recommended that tire installers refer to the Mazda Miata owner’s manual to identify any tire speed rating restriction or recommendation that could affect the operation of the vehicle. If your Mazda Miata replacement tires have a lower speed rating than the original equipment tires, your vehicle’s speed must be restricted to that of the replacement tires. Original equipment tires that come on your Mazda Miata will have the proper tire load index, so use same or higher load index when choosing replacement tires. Tire load index tells you how much weight your tire can carry. Putting too much weight on your tires will overload them, and can cause premature tire wear, tire damage or even tire blowout. Refer to your Mazda Miata manual to find its original equipment tire sizes and load ratings. Always refer to the Mazda Miata owner’s manual for any specific safety advice regarding the application of Mazda Miata replacement tires.

Mazda Miata tire pressure may fluctuate with ambient temperatures, so check Mazda Miata tire pressure when ambient temperatures change. In winter when temperatures drop, Mazda Miata tires may deflate by approximately 1 psi for each 10 degree Fahrenheit decrease in temperature. Maintain proper Mazda Miata winter tire pressure by adding air to your tires as needed to the recommended tire inflation levels.

Mazda Miata tire pressure should be checked when tires are cold, after your vehicle has not been driven for at least three hours. It is best to check your tire inflation pressure in the morning, after the vehicle has been parked overnight, using a reliable tire pressure gauge.

If your Mazda Miata is equipped with tire pressure monitoring system (TPMS), pay attention to low tire pressure warning light being on. Ensure Mazda Miata tire pressure sensors are working properly to stay alert and enjoy a safe ride. If your tire pressure warning light is on, check front and rear tires to make sure they are properly inflated.

What is the recommended tire pressure for Mazda Miata?
Recommended tire pressure for Mazda Miata is determined by the manufacturer based on your vehicle's characteristics and original equipment tire sizes. Select your Mazda Miata year to get recommended tire inflation pressures for Mazda Miata tires.

Where do I find recommended tire pressure settings for Mazda Miata?
You can find your Mazda Miata recommended tire pressure in Mazda Miata owner's manual, on a tire placard on driver's door or door jam, inner trunk lid, in the console or on the fuel door. Recommended tire pressure for Mazda Miata will be listed in psi, bar or kPa.

How to check Mazda Miata tire pressure?
Proper Mazda Miata tire inflation is essential to the overall tire performance and safety. To check tire pressure for Mazda Miata you will need to know its recommended tire pressure and a tire pressure gauge. Check cold inflation pressures in Mazda Miata tires with tire pressure gauge and adjust to Mazda Miata recommended tire inflation pressures as needed by adding or releasing air. Make sure to check tire inflation for your Mazda Miata regularly to ensure safe and comfortable drive.

Why is Mazda Miata tire pressure warning light on?
If your Mazda Miata is equipped with Tire Pressure Monitoring System (TPMS) it will alert you when tire pressure is too low and your tires could be underinflated, which can lead to uneven tire wear or can cause tire failure. If Mazda Miata low tire pressure warning light is on, check all Mazda Miata tires for low air pressure and inflate tires to the recommended tire inflation pressures. Keep in mind that Tire Pressure Monitoring System does not replace routine tire pressure check and maintenance.

How do I reset Mazda Miata tire pressure monitoring system?
To reset tire pressure monitoring system for Mazda Miata, make sure front and rear tires are inflated to the recommended levels. Refer to your owner's manual on how to reset Mazda Miata TPMS.

What is recommended winter tire pressure for Mazda Miata?
Recommended tire pressure for Mazda Miata is the same for any season, but you may inflate your Mazda Miata tires 3 to 5 psi above the recommended tire pressure set by the manufacturer to compensate for lower temperatures during winter. Make sure to check your Mazda Miata tire pressure more often in the winter to keep tires properly inflated for a safe ride on snow and icy roads.

Tire Pressure Guide