Get recommended tire pressure for Subaru GL-10 tires to drive safe, extend tire life and reduce fuel consumption.

Select Subaru GL-10 year to find your Subaru GL-10 recommended tire pressure based on Subaru GL-10 original equipment tire sizes with tire inflation range from 28 psi to 28 psi for front tires and 28 psi to 32 psi for rear tires.

Buy discount Subaru GL-10 tire pressure gauges, Subaru GL-10 tire inflators, Subaru GL-10 tire pressure sensors and Subaru GL-10 tire pressure monitoring systems.

Recommended Tire Pressure for Subaru GL-10 Tires

It is important to maintain proper tire pressure for Subaru GL-10 tires. Low tire pressure will result in tire underinflation, and high tire pressure will result in tire overinflation, which can compromise tire safety, cause tire blowout, decrease fuel efficiency, cause uneven tire wear and reduce tire tread life. Check Subaru GL-10 tire pressure regularly, and monitor Subaru GL-10 tire inflation levels to avoid driving with overinflated or underinflated tires.

Tire inflation value listed on tire sidewall is a maximum tire pressure the tire can be inflated to, and not the recommended tire pressure for Subaru GL-10. Use recommended tire pressure listed on the tire pressure chart found on a sticker on driver's door jam or in Subaru GL-10 manual. Recommended tire pressure for your Subaru GL-10 tires will be listed in one of the following pressure units: psi (pound per square inch), bar or kPa (kilopascals). Pay attention as your Subaru GL-10 may have different recommended tire pressure values for front and rear tires. Keep your Subaru GL-10 tires inflated at recommended tire pressure levels at all times for your driving comfort and safety.

If you replace Subaru GL-10 original equipment tires with optional tire sizes or you switch to plus size tires, make sure to follow guidelines for the application of load and inflation tables to find proper tire pressure for new tires on your Subaru GL-10. Subaru GL-10 tires with the same load index, regardless of tire size, may carry the same load, but not always, and they may require substantially different inflation pressures. Tire load index may not be used independently to determine replacement tire acceptability for load capacity. An equal or greater load index does not always correspond to equal or greater load capacity at all inflation pressure settings.

Always refer to the Subaru GL-10 owner’s manual for any specific safety advice regarding the application of Subaru GL-10 replacement tires.

Subaru GL-10 replacement tires must have equal or greater speed rating compared to the original equipment tires if your Subaru GL-10 speed capability is to be maintained. It is recommended that tire installers refer to the Subaru GL-10 owner’s manual to identify any tire speed rating restriction or recommendation that could affect the operation of the vehicle. If your Subaru GL-10 replacement tires have a lower speed rating than the original equipment tires, the vehicle’s speed must be restricted to that of the replacement tires.

Original equipment tires that come on your Subaru GL-10 will have the proper tire load index, so stick to that number or higher when you replace them with new tires. Tire load index tells you how much weight your tire can carry. Putting too much weight on your tires will overload them, and can cause tire damage, premature tire wear or even tire blowout. Refer to your Subaru GL-10 manual to find its original equipment tire sizes and their load ratings.

Subaru GL-10 tire pressure changes with temperature, so check your Subaru GL-10 tire pressure when outside temperature goes up or down. During colder months when temperatures drop, Subaru GL-10 tire pressure will decrease also by approximately 1 psi for each 10 degrees Fahrenheit. Maintain proper Subaru GL-10 winter tire pressure by adding air to your tires as needed to the recommended tire inflation levels.

Subaru GL-10 tire pressure should be checked when tires are cold, after your vehicle has not been driven for at least three hours. It is best to check your tire inflation pressure in the morning, after the vehicle has been parked overnight, using a reliable tire pressure gauge.

If your Subaru GL-10 is equipped with tire pressure monitoring system (TPMS), pay attention to low tire pressure warning light being on. Ensure your tire pressure sensors are working properly to stay alert and enjoy a safe ride. If your tire pressure warning light is on, check front and rear tires to make sure they are properly inflated.

What is the recommended tire pressure for my Subaru GL-10?
Recommended tire pressure for Subaru GL-10 is determined by the manufacturer based on your vehicle's characteristics and original equipment tire sizes. Find your Subaru GL-10 year to get recommended tire inflation for Subaru GL-10 tires.

How do I find my recommended tire pressure setting for my Subaru GL-10? What is correct Subaru GL-10 tire pressure?
You can find your Subaru GL-10 recommended tire pressure in Subaru GL-10 owner's manual, on sticker attached to the driver's door jam, inside glove box compartment or fuel door. Recommended tire inflation for Subaru GL-10 will be listed in psi, bar or kPa.

How to check my Subaru GL-10 tire pressure?
Proper Subaru GL-10 tire inflation is essential to the overall tire performance of your vehicle. To check tire pressure for Subaru GL-10 you will need to know its recommended tire pressure levels and a standard or digital tire pressure gauge. Check inflation levels in Subaru GL-10 tires with the tire pressure gauge and adjust your Subaru GL-10 tire pressure to its recommended levels be adding or releasing air. Check Subaru GL-10 tire pressure levels in all tires again. Make sure to check tire inflation for your Subaru GL-10 regularly to ensure safe and comfortable drive.

Why is my Subaru GL-10 tire pressure warning light on?
If your Subaru GL-10 is equipped with Tire Pressure Monitoring System (TPMS) it will alert you when tire pressure is too low and your tires could be underinflated, which can lead to uneven tire wear and can cause tire failure. If Subaru GL-10 low tire pressure warning light is on, check all Subaru GL-10 tires for low tire pressure and inflate tires to the recommended tire pressure levels. Keep in mind that Tire Pressure Monitoring System does not replace routine tire pressure check and maintenance.

How to reset tire pressure warning light for Subaru GL-10?
To reset tire pressure monitoring system for Subaru GL-10, make sure front and rear tires are inflated to the recommended levels. Turn the engine on, then press and hold the tire pressure reset button located under the steering wheel on the instrument panel. Hold the button down until the TPMS light blinks three times, then release the button.

What is my recommended winter tire pressure for my Subaru GL-10?
Recommended winter tire pressure for Subaru GL-10 is the same as all other seasons. You should keep tire inflation at recommended levels in any weather conditions. Subaru GL-10 tire inflation will decrease with lower outside temperatures, so make sure to check Subaru GL-10 tire pressure during winter months regularly to keep Subaru GL-10 tires properly inflated in the winter.

Find Tire Pressure - find recommended tire pressure for my car, light truck, pickup, minivan, crossover, SUV, motorcycle, sports bike, dirt bike or scooter.

Discount Tire Pressure Products - buy discount tire pressure sensors, tire pressure gauges, tire inflators & air compressors, tire pressure monitoring systems (TPMS), tire pressure tools and accessories.

Tire Pressure Forum - tire pressure and tire inflation topics, questions and answers.

Tire Pressure Guide - tire pressure and tire inflation facts, tips and suggestions.

Tire Pressure Charts - tire pressure charts and tire inflation tables.

Tire Pressure Calculators - tire pressure unit conversion, gas savings calculator, tire pressure temperature calculator, and more.