Subaru DL Recommended Tire Pressure

Check Subaru DL tire pressure chart to find recommended tire pressure for Subaru DL tires for better fuel efficiency, longer tire life and safer driving. Select your Subaru DL year.

It is important to maintain proper tire pressure for Subaru DL tires. Low tire pressure will result in tire underinflation, and high tire pressure will result in tire overinflation, which can compromise tire safety, cause tire blowout, decrease fuel efficiency, cause uneven tire wear and reduce tire tread life. Check Subaru DL tire pressure regularly, and monitor Subaru DL tire inflation levels to avoid driving with overinflated or underinflated tires.

Tire inflation value listed on tire sidewall is a maximum tire pressure the tire can be inflated to, and not the recommended tire pressure for Subaru DL. Use recommended tire pressure listed on the tire pressure chart found on a sticker on driver's door jam or in Subaru DL manual. Recommended tire pressure for your Subaru DL tires will be listed in one of the following pressure units: psi (pounds per square inch), bar or kPa (kiloPascals). Pay attention as your Subaru DL may have different recommended tire pressure values for front and rear tires. Keep your Subaru DL tires inflated at recommended tire pressure levels at all times for your driving comfort and safety.

If you replace Subaru DL original equipment tires with optional tire sizes or you switch to plus size tires, make sure to follow guidelines for the application of load and inflation tables to find proper tire pressure for new tires on your Subaru DL. Subaru DL tires with the same load index, regardless of tire size, may carry the same load, but not always, and they may require substantially different inflation pressures. Tire load index may not be used independently to determine replacement tire acceptability for load capacity. An equal or greater load index does not always correspond to equal or greater load capacity at all inflation pressure settings.

Always refer to the Subaru DL owner’s manual for any specific safety advice regarding the application of Subaru DL replacement tires.

Subaru DL replacement tires must have equal or greater speed rating compared to the original equipment tires if your Subaru DL speed capability is to be maintained. It is recommended that tire installers refer to the Subaru DL owner’s manual to identify any tire speed rating restriction or recommendation that could affect the operation of the vehicle. If your Subaru DL replacement tires have a lower speed rating than the original equipment tires, the vehicle’s speed must be restricted to that of the replacement tires.

Original equipment tires that come on your Subaru DL will have the proper tire load index, so stick to that number or higher when you replace them with new tires. Tire load index tells you how much weight your tire can carry. Putting too much weight on your tires will overload them, and can cause tire damage, premature tire wear or even tire blowout. Refer to your Subaru DL manual to find its original equipment tire sizes and their load ratings.

Subaru DL tire pressure changes with temperature, so check your Subaru DL tire pressure when outside temperature goes up or down. During colder months when temperatures drop, Subaru DL tire pressure will decrease also by approximately 1 psi for each 10 degrees Fahrenheit. Maintain proper Subaru DL winter tire pressure by adding air to your tires as needed to the recommended tire inflation levels.

Subaru DL tire pressure should be checked when tires are cold, after your vehicle has not been driven for at least three hours. It is best to check your tire inflation pressure in the morning, after the vehicle has been parked overnight, using a reliable tire pressure gauge.

If your Subaru DL is equipped with tire pressure monitoring system (TPMS), pay attention to low tire pressure warning light being on. Ensure your tire pressure sensors are working properly to stay alert and enjoy a safe ride. If your tire pressure warning light is on, check front and rear tires to make sure they are properly inflated.

What is the recommended tire pressure for Subaru DL?
Recommended tire pressure for Subaru DL is determined by the manufacturer based on your vehicle's characteristics and original equipment tire sizes. Find your Subaru DL year to get recommended tire inflation for Subaru DL tires.

How do I find recommended tire pressure setting for Subaru DL? What is correct Subaru DL tire pressure?
You can find your Subaru DL recommended tire pressure in Subaru DL owner's manual, on sticker attached to the driver's door jam, inside glove box compartment or fuel door. Recommended tire inflation for Subaru DL will be listed in psi, bar or kPa.

How to check Subaru DL tire pressure?
Proper Subaru DL tire inflation is essential to the overall tire performance of your vehicle. To check tire pressure for Subaru DL you will need to know its recommended tire pressure levels and a standard or digital tire pressure gauge. Check inflation levels in Subaru DL tires with the tire pressure gauge and adjust your Subaru DL tire pressure to its recommended levels be adding or releasing air. Check Subaru DL tire pressure levels in all tires again. Make sure to check tire inflation for your Subaru DL regularly to ensure safe and comfortable drive.

Why is Subaru DL tire pressure warning light on?
If your Subaru DL is equipped with Tire Pressure Monitoring System (TPMS) it will alert you when tire pressure is too low and your tires could be underinflated, which can lead to uneven tire wear and can cause tire failure. If Subaru DL low tire pressure warning light is on, check all Subaru DL tires for low tire pressure and inflate tires to the recommended tire pressure levels. Keep in mind that Tire Pressure Monitoring System does not replace routine tire pressure check and maintenance.

How to reset tire pressure warning light for Subaru DL?
To reset tire pressure monitoring system for Subaru DL, make sure front and rear tires are inflated to the recommended levels. Turn the engine on, then press and hold the tire pressure reset button located under the steering wheel on the instrument panel. Hold the button down until the TPMS light blinks three times, then release the button.

What is recommended winter tire pressure for Subaru DL?
Recommended winter tire pressure for Subaru DL is the same as all other seasons. You should keep tire inflation at recommended levels in any weather conditions. Subaru DL tire inflation will decrease with lower outside temperatures, so make sure to check Subaru DL tire pressure during winter months regularly to keep Subaru DL tires properly inflated in the winter.