Get recommended tire pressure for Merkur tires to drive safe, extend tire life and reduce fuel consumption.
Select Merkur model to find your Merkur recommended tire pressure based on Merkur original equipment tire sizes with tire inflation range from 30 psi to 32 psi for front tires and 30 psi to 34 psi for rear tires.
Recommended tire pressure for Merkur Scorpio tires.
Recommended tire pressure for Merkur XR4Ti tires.
It is important to maintain proper tire pressure for Merkur tires. Low tire pressure will result in tire underinflation, and high tire pressure will result in tire overinflation, which can compromise tire safety, cause tire blowout, decrease fuel efficiency, cause uneven tire wear and reduce tire tread life. Check Merkur tire pressure regularly, and monitor Merkur tire inflation levels to avoid driving with overinflated or underinflated tires.
Tire inflation value listed on tire sidewall is a maximum tire pressure the tire can be inflated to, and not the recommended tire pressure for Merkur. Use recommended tire pressure listed on the tire pressure chart found on a sticker on driver's door jam or in Merkur manual. Recommended tire pressure for your Merkur tires will be listed in one of the following pressure units: psi (pound per square inch), bar or kPa (kilopascals). Pay attention as your Merkur may have different recommended tire pressure values for front and rear tires. Keep your Merkur tires inflated at recommended tire pressure levels at all times for your driving comfort and safety.
If you replace Merkur original equipment tires with optional tire sizes or you switch to plus size tires, make sure to follow guidelines for the application of load and inflation tables to find proper tire pressure for new tires on your Merkur. Merkur tires with the same load index, regardless of tire size, may carry the same load, but not always, and they may require substantially different inflation pressures. Tire load index may not be used independently to determine replacement tire acceptability for load capacity. An equal or greater load index does not always correspond to equal or greater load capacity at all inflation pressure settings.
Always refer to the Merkur owner’s manual for any specific safety advice regarding the application of Merkur replacement tires.
Merkur replacement tires must have equal or greater speed rating compared to the original equipment tires if your Merkur speed capability is to be maintained. It is recommended that tire installers refer to the Merkur owner’s manual to identify any tire speed rating restriction or recommendation that could affect the operation of the vehicle. If your Merkur replacement tires have a lower speed rating than the original equipment tires, your vehicle’s speed must be restricted to that of the replacement tires.
Original equipment tires that come on your Merkur will have the proper tire load index, so stick to that number or higher when you replace them with new tires. Tire load index tells you how much weight your tire can carry. Putting too much weight on your tires will overload them, and can cause tire damage, premature tire wear or even tire blowout. Refer to your Merkur manual to find its original equipment tire sizes and their load ratings.
Merkur tire pressure changes with temperature, so check your Merkur tire pressure when outside temperature goes up or down. During colder months when temperatures drop, Merkur tire pressure will decrease also by approximately 1 psi for each 10 degrees Fahrenheit. Maintain proper Merkur winter tire pressure by adding air to your tires as needed to the recommended tire inflation levels.
Merkur tire pressure should be checked when tires are cold, after your vehicle has not been driven for at least three hours. It is best to check your tire inflation pressure in the morning, after the vehicle has been parked overnight, using a reliable tire pressure gauge.
If your Merkur is equipped with tire pressure monitoring system (TPMS), pay attention to low tire pressure warning light being on. Ensure your tire pressure sensors are working properly to stay alert and enjoy a safe ride. If your tire pressure warning light is on, check front and rear tires to make sure they are properly inflated.
What is the recommended tire pressure for my Merkur?
Recommended tire pressure for Merkur is determined by the manufacturer based on your vehicle's characteristics and original equipment tire sizes. Find your Merkur year or model to get recommended tire inflation for Merkur tires.
How do I find my recommended tire pressure setting for my Merkur? What is correct Merkur tire pressure?
You can find your Merkur recommended tire pressure in Merkur owner's manual, on sticker attached to the driver's door jam, inside glove box compartment or fuel door. Recommended tire inflation for Merkur will be listed in psi, bar or kPa.
How to check my Merkur tire pressure?
Proper Merkur tire inflation is essential to the overall tire performance of your vehicle. To check tire pressure for Merkur you will need to know its recommended tire pressure levels and a standard or digital tire pressure gauge. Check inflation levels in Merkur tires with the tire pressure gauge and adjust your Merkur tire pressure to its recommended levels be adding or releasing air. Check Merkur tire pressure levels in all tires again. Make sure to check tire inflation for your Merkur regularly to ensure safe and comfortable drive.
Why is my Merkur tire pressure warning light on?
If your Merkur is equipped with Tire Pressure Monitoring System (TPMS) it will alert you when tire pressure is too low and your tires could be underinflated, which can lead to uneven tire wear or can cause tire failure. If Merkur low tire pressure warning light is on, check all Merkur tires for low tire pressure and inflate tires to the recommended tire pressure levels. Keep in mind that Tire Pressure Monitoring System does not replace routine tire pressure check and maintenance.
How to reset tire pressure warning light for Merkur?
To reset tire pressure monitoring system for Merkur, make sure front and rear tires are inflated to the recommended levels. Turn the engine on, then press and hold the tire pressure reset button located under the steering wheel on the instrument panel. Hold the button down until the TPMS light blinks three times, then release the button.
What is my recommended winter tire pressure for my Merkur?
Recommended winter tire pressure for Merkur is the same as all other seasons. You should keep tire inflation at recommended levels in any weather conditions. Merkur tire inflation will decrease with lower outside temperatures, so make sure to check Merkur tire pressure during winter months regularly to keep Merkur tires properly inflated in the winter.
Find Tire Pressure - find recommended tire pressure for my car, light truck, pickup, minivan, crossover, SUV, motorcycle, sports bike, dirt bike or scooter.
Discount Tire Pressure Products - buy discount tire pressure sensors, tire pressure gauges, tire inflators & air compressors, tire pressure monitoring systems (TPMS), tire pressure tools and accessories.
Tire Pressure Forum - tire pressure and tire inflation topics, questions and answers.
Tire Pressure Guide - tire pressure and tire inflation facts, tips and suggestions.
Tire Pressure Charts - tire pressure charts and tire inflation tables.
Tire Pressure Calculators - tire pressure unit conversion, gas savings calculator, tire pressure temperature calculator, and more.