Mercury Lynx Recommended Tire Pressure

Check Mercury Lynx tire pressure chart to find recommended tire pressure for Mercury Lynx tires for better fuel efficiency, longer tire life and safer driving. Select your Mercury Lynx year.

It is important to maintain proper tire pressure for Mercury Lynx tires. Low tire pressure will result in tire underinflation, and high tire pressure will result in tire overinflation, which can compromise tire safety, cause tire blowout, decrease fuel efficiency, cause uneven tire wear and reduce tire tread life. Check Mercury Lynx tire pressure regularly, and monitor Mercury Lynx tire inflation levels to avoid driving with overinflated or underinflated tires.

Tire inflation value listed on tire sidewall is a maximum tire pressure the tire can be inflated to, and not the recommended tire pressure for Mercury Lynx. Use recommended tire pressure listed on the tire pressure chart found on a sticker on driver's door jam or in Mercury Lynx manual. Recommended tire pressure for your Mercury Lynx tires will be listed in one of the following pressure units: psi (pounds per square inch), bar or kPa (kiloPascals). Pay attention as your Mercury Lynx may have different recommended tire pressure values for front and rear tires. Keep your Mercury Lynx tires inflated at recommended tire pressure levels at all times for your driving comfort and safety.

If you replace Mercury Lynx original equipment tires with optional tire sizes or you switch to plus size tires, make sure to follow guidelines for the application of load and inflation tables to find proper tire pressure for new tires on your Mercury Lynx. Mercury Lynx tires with the same load index, regardless of tire size, may carry the same load, but not always, and they may require substantially different inflation pressures. Tire load index may not be used independently to determine replacement tire acceptability for load capacity. An equal or greater load index does not always correspond to equal or greater load capacity at all inflation pressure settings.

Always refer to the Mercury Lynx owner’s manual for any specific safety advice regarding the application of Mercury Lynx replacement tires.

Mercury Lynx replacement tires must have equal or greater speed rating compared to the original equipment tires if your Mercury Lynx speed capability is to be maintained. It is recommended that tire installers refer to the Mercury Lynx owner’s manual to identify any tire speed rating restriction or recommendation that could affect the operation of the vehicle. If your Mercury Lynx replacement tires have a lower speed rating than the original equipment tires, the vehicle’s speed must be restricted to that of the replacement tires.

Original equipment tires that come on your Mercury Lynx will have the proper tire load index, so stick to that number or higher when you replace them with new tires. Tire load index tells you how much weight your tire can carry. Putting too much weight on your tires will overload them, and can cause tire damage, premature tire wear or even tire blowout. Refer to your Mercury Lynx manual to find its original equipment tire sizes and their load ratings.

Mercury Lynx tire pressure changes with temperature, so check your Mercury Lynx tire pressure when outside temperature goes up or down. During colder months when temperatures drop, Mercury Lynx tire pressure will decrease also by approximately 1 psi for each 10 degrees Fahrenheit. Maintain proper Mercury Lynx winter tire pressure by adding air to your tires as needed to the recommended tire inflation levels.

Mercury Lynx tire pressure should be checked when tires are cold, after your vehicle has not been driven for at least three hours. It is best to check your tire inflation pressure in the morning, after the vehicle has been parked overnight, using a reliable tire pressure gauge.

If your Mercury Lynx is equipped with tire pressure monitoring system (TPMS), pay attention to low tire pressure warning light being on. Ensure your tire pressure sensors are working properly to stay alert and enjoy a safe ride. If your tire pressure warning light is on, check front and rear tires to make sure they are properly inflated.

What is the recommended tire pressure for Mercury Lynx?
Recommended tire pressure for Mercury Lynx is determined by the manufacturer based on your vehicle's characteristics and original equipment tire sizes. Find your Mercury Lynx year to get recommended tire inflation for Mercury Lynx tires.

How do I find recommended tire pressure setting for Mercury Lynx? What is correct Mercury Lynx tire pressure?
You can find your Mercury Lynx recommended tire pressure in Mercury Lynx owner's manual, on sticker attached to the driver's door jam, inside glove box compartment or fuel door. Recommended tire inflation for Mercury Lynx will be listed in psi, bar or kPa.

How to check Mercury Lynx tire pressure?
Proper Mercury Lynx tire inflation is essential to the overall tire performance of your vehicle. To check tire pressure for Mercury Lynx you will need to know its recommended tire pressure levels and a standard or digital tire pressure gauge. Check inflation levels in Mercury Lynx tires with the tire pressure gauge and adjust your Mercury Lynx tire pressure to its recommended levels be adding or releasing air. Check Mercury Lynx tire pressure levels in all tires again. Make sure to check tire inflation for your Mercury Lynx regularly to ensure safe and comfortable drive.

Why is Mercury Lynx tire pressure warning light on?
If your Mercury Lynx is equipped with Tire Pressure Monitoring System (TPMS) it will alert you when tire pressure is too low and your tires could be underinflated, which can lead to uneven tire wear and can cause tire failure. If Mercury Lynx low tire pressure warning light is on, check all Mercury Lynx tires for low tire pressure and inflate tires to the recommended tire pressure levels. Keep in mind that Tire Pressure Monitoring System does not replace routine tire pressure check and maintenance.

How to reset tire pressure warning light for Mercury Lynx?
To reset tire pressure monitoring system for Mercury Lynx, make sure front and rear tires are inflated to the recommended levels. Turn the engine on, then press and hold the tire pressure reset button located under the steering wheel on the instrument panel. Hold the button down until the TPMS light blinks three times, then release the button.

What is recommended winter tire pressure for Mercury Lynx?
Recommended winter tire pressure for Mercury Lynx is the same as all other seasons. You should keep tire inflation at recommended levels in any weather conditions. Mercury Lynx tire inflation will decrease with lower outside temperatures, so make sure to check Mercury Lynx tire pressure during winter months regularly to keep Mercury Lynx tires properly inflated in the winter.