Mercury Bobcat Recommended Tire Pressure

Check Mercury Bobcat tire pressure charts with recommended tire inflation pressures for Mercury Bobcat tires to improve fuel efficiency, extend tire life and drive safely. Select your Mercury Bobcat year.

Recommended tire pressure for Mercury Bobcat

It is vital to maintain proper tire inflation pressures for Mercury Bobcat tires. Low tire pressure will result in tire underinflation while high tire pressure will result in tire overinflation, which can reduce fuel efficiency, lead to uneven tire tread wear and decrease tire life, compromise tire safety and cause tire blowout. Check Mercury Bobcat tire pressure regularly, and monitor Mercury Bobcat tire inflation pressures to avoid driving with overinflated or underinflated tires.

Tire inflation listed on tire sidewall is the maximum air pressure the tire can hold to carry its maximum load, and not the recommended tire pressure for Mercury Bobcat. Use Mercury Bobcat recommended tire pressure settings listed on the tire pressure chart found in Mercury Bobcat owner's manual, on a tire placard on driver's door or door jam, inner trunk lid, in the console or on the fuel door. Recommended tire pressure for your Mercury Bobcat tire sizes will be listed in one of the following pressure units: psi (pounds per square inch), bar or kPa (kiloPascals). Pay attention as your Mercury Bobcat may have different recommended tire inflation pressures for front and rear tires, especially if equipped with staggered tires. Keep your Mercury Bobcat tires inflated at recommended tire inflation pressures at all times for your driving comfort and safety.

If you replace Mercury Bobcat original equipment tires or switch to plus size tires, make sure to follow guidelines for the application of load and inflation tables to find proper tire pressure for your new Mercury Bobcat tires. Mercury Bobcat tires with the same load index, regardless of tire size, may carry the same load, but may require substantially different inflation pressures. Tire load index may not be used independently to determine replacement tire acceptability for load capacity. An equal or greater load index does not always correspond to equal or greater load capacity at all inflation pressure settings. Mercury Bobcat replacement tires must have equal or greater speed rating compared to the original equipment tires if your Mercury Bobcat speed capability is to be maintained. It is recommended that tire installers refer to the Mercury Bobcat owner’s manual to identify any tire speed rating restriction or recommendation that could affect the operation of the vehicle. If your Mercury Bobcat replacement tires have a lower speed rating than the original equipment tires, your vehicle’s speed must be restricted to that of the replacement tires. Original equipment tires that come on your Mercury Bobcat will have the proper tire load index, so use same or higher load index when choosing replacement tires. Tire load index tells you how much weight your tire can carry. Putting too much weight on your tires will overload them, and can cause premature tire wear, tire damage or even tire blowout. Refer to your Mercury Bobcat manual to find its original equipment tire sizes and load ratings. Always refer to the Mercury Bobcat owner’s manual for any specific safety advice regarding the application of Mercury Bobcat replacement tires.

Mercury Bobcat tire pressure may fluctuate with ambient temperatures, so check Mercury Bobcat tire pressure when ambient temperatures change. In winter when temperatures drop, Mercury Bobcat tires may deflate by approximately 1 psi for each 10 degree Fahrenheit decrease in temperature. Maintain proper Mercury Bobcat winter tire pressure by adding air to your tires as needed to the recommended tire inflation levels.

Mercury Bobcat tire pressure should be checked when tires are cold, after your vehicle has not been driven for at least three hours. It is best to check your tire inflation pressure in the morning, after the vehicle has been parked overnight, using a reliable tire pressure gauge.

If your Mercury Bobcat is equipped with tire pressure monitoring system (TPMS), pay attention to low tire pressure warning light being on. Ensure Mercury Bobcat tire pressure sensors are working properly to stay alert and enjoy a safe ride. If your tire pressure warning light is on, check front and rear tires to make sure they are properly inflated.

What is the recommended tire pressure for Mercury Bobcat?
Recommended tire pressure for Mercury Bobcat is determined by the manufacturer based on your vehicle's characteristics and original equipment tire sizes. Select your Mercury Bobcat year to get recommended tire inflation pressures for Mercury Bobcat tires.

Where do I find recommended tire pressure settings for Mercury Bobcat?
You can find your Mercury Bobcat recommended tire pressure in Mercury Bobcat owner's manual, on a tire placard on driver's door or door jam, inner trunk lid, in the console or on the fuel door. Recommended tire pressure for Mercury Bobcat will be listed in psi, bar or kPa.

How to check Mercury Bobcat tire pressure?
Proper Mercury Bobcat tire inflation is essential to the overall tire performance and safety. To check tire pressure for Mercury Bobcat you will need to know its recommended tire pressure and a tire pressure gauge. Check cold inflation pressures in Mercury Bobcat tires with tire pressure gauge and adjust to Mercury Bobcat recommended tire inflation pressures as needed by adding or releasing air. Make sure to check tire inflation for your Mercury Bobcat regularly to ensure safe and comfortable drive.

Why is Mercury Bobcat tire pressure warning light on?
If your Mercury Bobcat is equipped with Tire Pressure Monitoring System (TPMS) it will alert you when tire pressure is too low and your tires could be underinflated, which can lead to uneven tire wear or can cause tire failure. If Mercury Bobcat low tire pressure warning light is on, check all Mercury Bobcat tires for low air pressure and inflate tires to the recommended tire inflation pressures. Keep in mind that Tire Pressure Monitoring System does not replace routine tire pressure check and maintenance.

How do I reset Mercury Bobcat tire pressure monitoring system?
To reset tire pressure monitoring system for Mercury Bobcat, make sure front and rear tires are inflated to the recommended levels. Refer to your owner's manual on how to reset Mercury Bobcat TPMS.

What is recommended winter tire pressure for Mercury Bobcat?
Recommended tire pressure for Mercury Bobcat is the same for any season, but you may inflate your Mercury Bobcat tires 3 to 5 psi above the recommended tire pressure set by the manufacturer to compensate for lower temperatures during winter. Make sure to check your Mercury Bobcat tire pressure more often in the winter to keep tires properly inflated for a safe ride on snow and icy roads.

Tire Pressure Guide