Recommended tire pressure for 2017 Bentley tires
It is vital to maintain proper tire inflation pressures for 2017 Bentley tires. Low tire pressure will result in tire underinflation while high tire pressure will result in tire overinflation, which can reduce fuel efficiency, lead to uneven tire tread wear and decrease tire life, compromise tire safety and cause tire blowout. Check 2017 Bentley tire pressure regularly, and monitor 2017 Bentley tire inflation pressures to avoid driving with overinflated or underinflated tires.
Tire inflation listed on tire sidewall is the maximum air pressure the tire can hold to carry its maximum load, and not the recommended tire pressure for 2017 Bentley. Use 2017 Bentley recommended tire pressure settings listed on the tire pressure chart found in 2017 Bentley owner's manual, on a tire placard on driver's door or door jam, inner trunk lid, in the console or on the fuel door. Recommended tire pressure for your 2017 Bentley tire sizes will be listed in one of the following pressure units: psi (pounds per square inch), bar or kPa (kiloPascals). Pay attention as your 2017 Bentley may have different recommended tire inflation pressures for front and rear tires, especially if equipped with staggered tires. Keep your 2017 Bentley tires inflated at recommended tire inflation pressures at all times for your driving comfort and safety.
If you replace 2017 Bentley original equipment tires or switch to plus size tires, make sure to follow guidelines for the application of load and inflation tables to find proper tire pressure for your new 2017 Bentley tires. 2017 Bentley tires with the same load index, regardless of tire size, may carry the same load, but may require substantially different inflation pressures. Tire load index may not be used independently to determine replacement tire acceptability for load capacity. An equal or greater load index does not always correspond to equal or greater load capacity at all inflation pressure settings. 2017 Bentley replacement tires must have equal or greater speed rating compared to the original equipment tires if your 2017 Bentley speed capability is to be maintained. It is recommended that tire installers refer to the 2017 Bentley owner’s manual to identify any tire speed rating restriction or recommendation that could affect the operation of the vehicle. If your 2017 Bentley replacement tires have a lower speed rating than the original equipment tires, your vehicle’s speed must be restricted to that of the replacement tires. Original equipment tires that come on your 2017 Bentley will have the proper tire load index, so use same or higher load index when choosing replacement tires. Tire load index tells you how much weight your tire can carry. Putting too much weight on your tires will overload them, and can cause premature tire wear, tire damage or even tire blowout. Refer to your 2017 Bentley manual to find its original equipment tire sizes and load ratings. Always refer to the 2017 Bentley owner’s manual for any specific safety advice regarding the application of 2017 Bentley replacement tires.
2017 Bentley tire pressure may fluctuate with ambient temperatures, so check 2017 Bentley tire pressure when ambient temperatures change. In winter when temperatures drop, 2017 Bentley tires may deflate by approximately 1 psi for each 10 degree Fahrenheit decrease in temperature. Maintain proper 2017 Bentley winter tire pressure by adding air to your tires as needed to the recommended tire inflation levels.
2017 Bentley tire pressure should be checked when tires are cold, after your vehicle has not been driven for at least three hours. It is best to check your tire inflation pressure in the morning, after the vehicle has been parked overnight, using a reliable tire pressure gauge.
If your 2017 Bentley is equipped with tire pressure monitoring system (TPMS), pay attention to low tire pressure warning light being on. Ensure 2017 Bentley tire pressure sensors are working properly to stay alert and enjoy a safe ride. If your tire pressure warning light is on, check front and rear tires to make sure they are properly inflated.
What is the recommended tire pressure for 2017 Bentley?
Recommended tire pressure for 2017 Bentley is determined by the manufacturer based on your vehicle's characteristics and original equipment tire sizes. Select your 2017 Bentley model to get recommended tire inflation pressures for 2017 Bentley tires.
Where do I find recommended tire inflation pressures for 2017 Bentley?
You can find your 2017 Bentley recommended tire pressure in 2017 Bentley owner's manual, on a tire placard on driver's door or door jam, inner trunk lid, in the console or on the fuel door. Recommended tire pressure for 2017 Bentley will be listed in psi, bar or kPa.
How to check 2017 Bentley tire pressure?
Proper 2017 Bentley tire inflation is essential to the overall tire performance and safety. To check tire pressure for 2017 Bentley you will need to know its recommended tire pressure and a tire pressure gauge. Check cold inflation pressures in 2017 Bentley tires with tire pressure gauge and adjust to 2017 Bentley recommended tire inflation pressures as needed by adding or releasing air. Make sure to check tire inflation for your 2017 Bentley regularly to ensure safe and comfortable drive.
Is my 2017 Bentley equipped with a tire pressure monitoring system (TPMS)?
If your Bentley is made after 2007, it should be equipped with tire pressure monitoring system. To confirm if your 2017 Bentley has TPMS, turn on the ignition without starting the engine. If a tire icon with an exclamation sign lights up on your dashboard, your 2017 Bentley is equipped with TPMS. You can also check 2017 Bentley owner's manual for more information.
Why is 2017 Bentley tire pressure warning light on?
If your 2017 Bentley is equipped with Tire Pressure Monitoring System (TPMS) it will alert you when tire pressure is too low and your tires could be underinflated, which can lead to uneven tire wear or can cause tire failure. If 2017 Bentley low tire pressure warning light is on, check all 2017 Bentley tires for low air pressure and inflate tires to the recommended tire inflation pressures. Keep in mind that Tire Pressure Monitoring System does not replace routine tire pressure check and maintenance.
How do I reset 2017 Bentley tire pressure monitoring system?
To reset tire pressure monitoring system for 2017 Bentley, make sure front and rear tires are inflated to the recommended levels. Refer to your owner's manual on how to reset 2017 Bentley TPMS.
What is recommended winter tire pressure for 2017 Bentley?
Recommended tire pressure for 2017 Bentley is the same for any season, but you may inflate your 2017 Bentley tires 3 to 5 psi above the recommended tire pressure set by the manufacturer to compensate for lower temperatures during winter. Make sure to check your 2017 Bentley tire pressure more often in the winter to keep tires properly inflated for a safe ride on snow and icy roads.